Our heavy-duty firebacks provide protection to fireplaces with compromised masonry integrity commonly seen on the lower portion of the back wall. They can also be used to protect sheet metal "heatalator" type fireplaces from the possibility of warping due to the common problems of rusting thin in the same area.

This is not and should not be intended to be a responsible solution to severely damaged masonry or steel components.

All firebacks are constructed of solid 3/8 in. plate steel. Our firebacks are totally self supporting and require no fireplace modifications. These firebacks are specifically designed and built by us to be used in conjunction with WALL OF FIRE grates.
MODEL FITS GRATE MODELS FIREBACK DIMENSIONS PRICE
F-4 S-4 / M-4 / T-4 18" wide 10" high $69.00
F-5 S-5 / M-5 / T-5 23" wide 10" high $85.00
F-6 S-6 / M-6 / T-6 28" wide 10" high $95.00
F-7 S-7 / M-7 / T-7 33" wide 10" high $105.00

Please note; using WALL OF FIRE firebacks with WALL OF FIRE grates will increase the overall width of the unit by two inches. Your fireplace back wall must be at least as wide as the fireback width.

Place fireback into position up against back wall Set grate in between the two fireback legs That's' all there is to it
Fill the WALL OF FIRE with firewood.
Now your ready to burn!