High-efficiency fireplace grates. 30 day trial period!
on orders over $99 within the contiguous USA.
0 ITEM(S) IN YOUR BAG / TOTAL: $0
Decorative vertical grates
Tall series decorative grates
> TR-7 Pineapple Rumford Fireplace Grate
Click on picture to enlarge
Write a Review
Email a friend
TR-7 Pineapple Rumford Fireplace Grate
Put me on the Waiting List
Add to Cart
This special grate is intended to fit smaller Rumford fireplaces. It is specifically designed to fit the common 36" wide Rumford fireplace with the following firebox measurements: 12" across the back wall, 36" across the front opening, measuring 12" in depth at the floor, and having an opening height of about 36". Of course, this grate can be used in fireplaces with slightly different dimensions too.
The total depth of the grate at the base is 16" (including the cast iron base ornament) measured from the rear of the grate to the tip of the center leg. The long center leg is essential for positive grate stability. This usually does not cause a problem with extra shallow fireboxes as long as the hearth in front of the firebox is the same height; allowing the center leg a level surface to rest on. Custom leg modifications are available if there is a raised obstruction that the center leg needs to clear such as an ash dump hatch. Call us at 1-800-274-7364 before ordering if leg modifications are required.
20" Tall, 29" Front width, 12" Rear width, 16" Deep.
Pineapple Rimford Grate
This is a very sturdy grate. It fits perfectly in a standard Rumford fireplace and it works much better than andirons or traditional grate. If you have a Rumford, you are accustomed to smoke spilling out the front. The design of the Rumford that throws out so much heat, also limits the size of fire you can have without the logs in front creating smoke that spills out into the room. With this grate, you can toss more logs on and create an enormous amount of heat. One nit. The decorative pineapples (which really dress it up) slide on to the tines. They come with set screws that hold them in place. There are no directions for these. We searched for the screws in the package for awhile, only to learn that they are already in the pineapples. They are tight to turn with the included tool. It's a right angle tool that looks like a hex, but is actually a Torx or custom tool. Don't lose it.
Did you find this helpful?
4 of 4
from Chestnut Hill.
Perfect Rumford Grate
I purchased my second Rumford Grate and it arrived on time and without any problems or issues.It assembled easily and fits absolutely perfectly in the fireplace. I could not be more pleased.
Did you find this helpful?
TR-7 Rumford Fireplace Grate
TR-9 Rumford Fireplace Grate
TR-9 Pineapple Rumford Fireplace Grate
1/2" RF-RM Rumford Fireback 12" Wide
3/4" HDRF-RM Heavy Duty Rumford Fireback 12" Wide
Browse By Brand
Browse By Category